The OHPF Type Light-packaging Special Compound Ink is a special compound ink for light packaging which does not contain benzene or ketone solvents. It is the best choice for printing composite plastic packaging without the need for poaching (steaming).

The performance characteristics:

1. It does not contain benzene and ketone solvents, and has little environmental pollution;

2. Good versatility, suitable for the printing of various composite packaging films;

3. The colors of printed products are rich, bright and have strong sense of layering;

4. The adaptability of the scraper and the reproducibility of the dot are excellent, and the printability is good;

5. Low solvent residue;

The applicable films:

Good adhesion to the following films:

The composite types:

Dry compound       Non-solvent compound

The printing viscosity:

The printing viscosities of the color ink and the white ink were set at about 13 to 20 seconds / 25 ° C 3# Chaen Cup.

(When using medium-speed drying and slow drying thinners, be very careful about residual solvents and dirt.)

The diluents formula:

Note: OHPU#1 is the fastest drying, OHPU#4 is the slowest drying.

Example Car speed 180 m / min White ink thinner ratio Ethyl acetate: N-propyl acetate = 60:40

                                                          Color ink thinner ratio Butyl acetate: N-propyl acetate = 50:50

The notes:

1. Cannot be used for poaching (steaming) packaging products.

2. This product should not be mixed with similar products of other manufacturers. When self-dispensing thinner, please pre-test the quality of self-purchased solvent to prevent the ink from deteriorating;

3. This product cannot be used as extrusion (leaching) structure printing, please select our LYMO system for extrusion products;

4. Shake the ink in the bucket before use to ensure quality consistency;

5. The product should be kept away from fire, sealed and stored for one year.