The PPH Type Ester-soluble Shrink-film Ink is produced by using an ester-soluble resin containing no benzene or ketone solvent, and pigment and auxiliary agents. It is a special ink designed for PP and PE shrink film packaging printing.

The performance characteristics:

1. This product does not contain benzene and ketone solvents, prints have no odor, low solvent residue, and is suitable for food packaging requirements;

2. It also has good adhesion to PP and PE films with low surface treatment;

3. The ink color is bright, the dots are clear, and the leveling property is good;

4. As long as the solvent is properly formulated, the ink is in the range of 50 m / min to 250 m / min, under cold air conditions can be completely dry.

The applicable substrates:

 PP, PE shrink films

The printing viscosity: 

White ink: 12~15 seconds/25°C     No. 3 Chaen Cup;

Color ink: 14~18 seconds/25°C      No. 3 Chaen Cup

The solvent ratios:

Note: No. 1 is the fastest, No. 4 is the slowest.

The notes:

1. Please do not mix with other manufacturers’ ester-soluble inks;

2. Please confirm the adhesion of the ink on the printed substrate before printing, and then evaluating the risk before printing;

3. Not recommended for composite packaging printing;

4. Due to geographical reasons, the ratio of diluent should be randomly adjusted;

5. When self-dispensing the diluent, please check the quality of the single solvent first;

6. Shake the ink in the bucket before use to ensure quality consistency;

7. The product should be kept away from fire, sealed and stored for one year.